Cost Guide

Forestry Mulching Cost in Lynchburg & Moore County, TN

Cut Brush Team · October 31, 2026 · 6 min read

Cut Brush tracked loader mulching into a hardwood tree line, chips flying from the Fecon head

Forestry mulching around Lynchburg and Moore County costs $1,500 to $4,000 an acre, and a small job starts at a minimum charge of about $1,500. Much of the clearing on farm ground is not an acre at all. It is a fence row measured in feet, so the useful question is how feet turn into acres and what a day of machine work actually covers.

At those rates, brush, saplings and stumps are ground into mulch on site, stumps finish flush with the soil and nothing is hauled away. Full stump removal below grade, and cutting and hauling very large trees, are discussed and priced in the quote. Grading is not part of our price: we clear to the ground so a builder can grade.

Turning Feet of Fence Into Acres

A row is priced by the ground it covers, which is its length times the width you want opened. Divide the square feet by 43,560 to get acres, then apply the band. Here are three rows at the $1,500 to $2,500 fence row band:

Fence rowGround coveredShare of an acreBand mathCharge
700 ft long, 25 ft wide17,500 sq ftabout 0.40$600 to $1,000Minimum of about $1,500
1,200 ft long, 20 ft wide24,000 sq ftabout 0.55$825 to $1,375Minimum of about $1,500
2,600 ft long, 30 ft wide78,000 sq ftabout 1.8$2,700 to $4,480By the acre

The minimum is a charge for the job, not a fee added on top. Once a row passes about an acre of ground, the acre band takes over. Every band, and what moves a job within it, is on the Lynchburg pricing page.

Cut Brush Jobs: Before and After
Aerial view of a roadside lot buried in vines and brush before forestry mulchingBEFORE
The same lot mulched to bare ground with its mature trees kept standingAFTER

How Many Acres a Day Does a Mulcher Clear?

A forestry mulcher clears about 1 to 2 acres a day in light brush and closer to half an acre in a dense stand. Thin briars and small saplings go quickly; a thick block with old trunks, or ground with rock close to the surface, slows the drum and cuts the day’s total.

That range is why quotes by the acre, by the hour and by the day can look so different. Each is a way of pricing the same machine time, and the only fair comparison is the finished cost per acre.

Comparing a Day Rate or an Hourly Quote

Multiply the hourly rate by the hours, or the day rate by the days, and add the trailer or mobilization charge. That sum is the job total. Divide it by the acres to get a per-acre figure you can set beside our band.

For example, two days at $1,400 is $2,800. Add a $500 trailer charge and the job total is $3,300. Over 2 acres that is $1,650 an acre, inside the $1,500 to $4,000 mulching band. If the same $3,300 only cleared a single acre, it would be $3,300 an acre, near the top of the band. The acres covered in the time decide the answer, not the rate on its own.

Never multiply a rate by the acres: that figure has nothing to do with what the job costs.

When Mulching Beats a Brush Hog

A brush hog is a mower. It is the right tool for hay fields, rank grass and weeds, and for woody regrowth while stems are thin; once saplings pass 2 to 3 inches across, the work moves to the mulcher. Brush hogging runs $75 to $400 an acre by field condition, so cutting a hay field with a mulcher would cost more than the job needs.

Mulching earns its price where a mower cannot go: a fence row grown up in briars, a pasture corner closed in by saplings, or a wooded block you want opened. It grinds the growth in place, so there is nothing left lying across the row.

What the Row Adds: Rock, Sinkholes and Rose

Lynchburg sits on the Highland Rim, which is underlain by limestone, and sinkholes and springs come with that rock. Two things follow for a quote. Rock near the surface wears the cutting teeth and slows the drum, so a rocky acre sits higher in its band than a soft one. And a sinkhole beside a row means the operator keeps the machine back from its rim and works around it.

Mention any depression or outcrop when we call about your quote. Marking it early costs nothing, and it lets the price reflect the care the pass will need.

Rose in the Row

A row with multiflora rose in it is cut in one pass, and that pass is what the acre or minimum rate covers. The crowns survive the cutter and send up new canes, so a return visit to cut the sprouts is listed as its own line on the quote. The Tennessee multiflora rose removal guide lays out the visits.

Timing and Permits

If you would rather burn than mulch, a Division of Forestry burn permit is required from October 15 through May 15 for debris pile fires, and some counties and towns set stricter rules. Mulching leaves nothing to burn.

Tennessee’s construction stormwater permit applies once clearing, grading, filling or excavating reaches one acre, or less within a larger common plan. Requirements vary by parcel, scope and jurisdiction, and the governing authority makes the determination. Statewide prices are in our Tennessee forestry mulching cost guide.

Frequently Asked Questions

Why does a short fence row still cost about $1,500?

The minimum is a charge for the job, not a fee added to it. The machine and its trailer come out for any size of job, so small jobs start at the floor and larger ones are priced by the acre.

Can I add a second row or a pasture corner to the same visit?

Yes, and it is the best use of the minimum. Rows and corners on the same visit share one trailer trip, so they cost far less together than as separate jobs. List everything bothering you before the quote.

Does rock cost more?

It can move a job within its band. Rock slows the drum and wears the teeth, so a rocky row sits higher than a soft one, and the quote shows the reason.

Get a Price for Your Lynchburg Property

Request a free quote and we’ll contact you to discuss your property, access and the clearing you need. You see the scope, the finish and the price in writing before any work starts.

Read more: towns, permits and limestone ground on our Lynchburg land clearing page.

Let's Get Started on Your Land

Request a free quote. We'll contact you to discuss your property, access, and the clearing you need.

Get a Free Quote

Or call us directly: (901) 617-4428

Call Free Quote