Saltcedar Removal in Texas: Cut, Treat and Check
Cut Brush Team · October 31, 2026 · 7 min read
Saltcedar, also called salt cedar or tamarisk, is removed in Texas by cutting or mulching the stand, having a licensed applicator treat the stumps, and checking for sprouts over the next few seasons. Cutting alone fails because the plant grows back from its roots. Clearing saltcedar from a draw, a creek bank or a pasture edge, with the trees you want left standing, falls in Cut Brush’s $1,500 to $2,500 per acre band, and a dense thicket prices higher.
This guide covers where saltcedar takes hold, why one cutting fails, what the leaf beetles do and leave, a plan that holds, how it plays out around Canyon and El Paso, and what the work costs.
Why Saltcedar Takes Hold Along Texas Draws and Rivers
Saltcedar is a small tree that causes major problems along rivers in the western half of Texas, and it has been recorded across the whole state. It grows 5 to 20 feet tall and does best in salty soil and in ground that is saturated for part of the year, which is why it follows rivers and draws. The most established saltcedar species in Texas is a state-designated noxious weed.
It spreads in two ways at once. A plant produces hundreds to thousands of seeds between April and October, and the seed travels on wind or water and can germinate within a day of touching moisture. It also spreads from its roots and from submerged stems, so a piece of a plant that washes down a draw can start a new one.
How to Recognize It
A saltcedar looks like a feathery shrub or small tree with slender branches and tiny, scale-like leaves. It flowers in spike-like clusters of pale pink to white. If you are not sure what is growing on your land, your county’s AgriLife Extension office can identify it from a photo or a sample.
Why One Cutting Fails
A draw cut back with a chainsaw in the fall is usually green again by the next summer, often with more stems than before.
Cutting removes the top. The roots are untouched, and saltcedar regrows from cuttings or roots alone, which is why mechanical removal on its own has been unsuccessful at killing it. Seeds already lying on the bank keep germinating as well.
The method that works is cutting the stump low and treating it right away. That treatment is a licensed applicator’s work, arranged by the landowner and applied following the product label. Our crew cuts and grinds; we do not apply herbicide.
Machine work still matters. It opens the draw and puts every stump in reach, and the treatment and the check-back visits are what finish the job.
What the Leaf Beetles Do, and What Is Left
Saltcedar leaf beetles were released as a biological control at Lake Meredith and Palo Duro Canyon, and they spread across waterways well beyond those sites, including the Canadian River and the Prairie Dog Town Fork of the Red River. In El Paso County, the beetle is defoliating saltcedars along the Rio Grande. Our crew does not release or manage the beetles, and a landowner should not plan around them.
Beetles strip leaves; they do not finish the job quickly. Killing a tree takes two to three years of defoliation, so a stand the beetles have worked on can sit half green and half bare for several seasons. When trees do die, the dead wood is still standing in the draw, and saltcedar is a plant that regrows from its roots, so a stand that looks finished may not be. Three things follow for an owner:
- A browned stand still needs cutting if you want the draw open.
- Stump treatment matters on whatever is still alive.
- The check-back visits are the same whether or not beetles have been through.
Clearing a Draw So It Stays Open: Cut, Treat, Check
Step one: bring the stand down. A tracked forestry mulcher grinds saltcedar into chips where it stood, and the operator steers around cottonwoods, willows and any other trees you flag to keep. It leaves stumps low and easy to reach. Narrow draws are worked from the bank, and soft ground is worked when it has firmed up enough to carry the machine.
Step two: treat the stumps. Treatment goes on the stump immediately after cutting, which means the applicator needs to be lined up before the cut. Ask for the treatment quoted as its own line so you can see the whole plan on paper.
Step three: check back. Controlling saltcedar is not a one-time job: seeds move easily on wind and water, so you need to go over the land regularly to find and remove seedlings. A walk along the draw each season, with spot treatment on anything green, is what turns a cleared stretch into one that stays clear. On a long run, a light second mulching pass from our crew can cost less than treating hundreds of sprouts by hand.
Write the scope down. Before work starts, the quote should say what finish you are getting, how low the stumps will be cut, who treats them and when, and what a return visit for sprouts costs. A plan with those four lines shows you the whole cost before work starts.
Work with your neighbours. A seeding stand upstream keeps supplying plants to the ground below it, so a cleared bank below an untreated stand will see seedlings for years. Where a draw crosses several properties, clearing the whole run in one season spreads the trip cost and slows the reseeding.
Saltcedar Around Canyon and Along the Rio Grande at El Paso
Palo Duro Canyon and the Panhandle Draws
Around Canyon in Randall County, saltcedar grows along the draws and waterways that cut the High Plains, and Palo Duro Canyon is one of the places beetles were first released. Most of the ground within 15 miles of town is grass or cropland, so the work is usually a draw, a creek bank or a pasture corner, not a woodlot, and small jobs start at the project minimum. Our Canyon pricing page lists every band and our Canyon forestry mulching cost guide shows how to compare a mulching quote with a day rate.
The Rio Grande Valley at El Paso
Beetles are working on saltcedar along the Rio Grande in the El Paso region, and the plan is the same there: cut or mulch, treat the stumps, check back. A river bank and its drains often have more than one owner and may be tied to an irrigation or drainage district, so settle who owns the bank, and whether anyone else has a say in the work, before any machine goes in. Our San Elizario land clearing page covers the Lower Valley and the towns around it.
What Saltcedar Removal Costs
Clearing saltcedar from a creek bank, draw edge or fence line, with the trees you are keeping left standing, falls in Cut Brush’s $1,500 to $2,500 per acre band. A narrow draw is priced by the acre equivalent of its strip: a bank 20 feet wide and about 2,200 feet long is roughly an acre. A dense thicket across a wide bottom moves into forestry mulching at up to $4,000 per acre. $1,500 is the minimum charge for a project, a floor and not a fee added on top. Where an acre lands depends on how dense the stand is and how easy it is to reach.
Our mulching price grinds the trees and stumps into mulch on site, leaves stumps flush with the ground and hauls nothing away. Full stump removal below grade and cut-and-haul for very large trees are discussed and priced in the quote. The stump treatment is a separate cost from a licensed applicator, and we do not price it. The Texas statewide figures are in our Texas land clearing cost guide.
Frequently Asked Questions
How do I get rid of saltcedar for good?
Cut or mulch the stand, have a licensed applicator treat the stumps right after, and check the ground each season for sprouts. Cutting alone lets it grow back.
Will the beetles kill my saltcedar?
They strip the leaves, and killing a tree takes two to three years of defoliation. A stand can stay partly alive and keep regrowing, so plan for cutting and treatment either way.
Is saltcedar the same as tamarisk?
Yes. Saltcedar, salt cedar and tamarisk are different names for the same group of plants. In Texas the usual name is saltcedar.
Can I burn the saltcedar I cut?
Burning rules depend on where your land is and on the local burn ban, so ask your county first. Mulching leaves nothing to burn.
Get Your Draw Back
If saltcedar has taken a draw, a creek bank or a pasture edge on your land, request a free quote. We’ll contact you to discuss your property, access and the clearing you need, and our crew puts the scope on paper, including what is and is not treated.
Read more: our Canyon land clearing page shows the Panhandle ground this plan was written for.
More from the Cut Brush Blog
Keep reading for more tips and guides on land clearing.
Cost Guide Forestry Mulching Cost in Canyon, TX (2026)
Forestry mulching around Canyon, TX runs $1,500 to $4,000 an acre. When a brush hog is enough, what 2 and 5 acres cost, and how day rates compare.
Guide Brazilian Peppertree Removal in Texas: Cut, Treat, Recheck
How to remove Brazilian peppertree in Texas: why one cutting fails, the cut, stump treatment and sprout plan that holds, and what clearing a stand costs.
Let's Get Started on Your Land
Request a free quote. We'll contact you to discuss your property, access, and the clearing you need.
Get a Free QuoteOr call us directly: (512) 601-6759