Guide

Japanese Honeysuckle Removal in Tennessee: Plan, Regrowth, Cost

Cut Brush Team · October 31, 2026 · 8 min read

Cut Brush tracked loader with a mulching head pushing into a dense thicket of leafy brush and vines

Walk a fence line or a woodlot edge in midwinter and one plant is still green while everything around it is bare. That is Japanese honeysuckle, a fragrant Asian vine that now blankets saplings, fences and forest floors across Tennessee.

Clearing it takes three things: cutting the vines back, cutting the regrowth while it is young, and a licensed applicator’s treatment of what keeps returning. Honeysuckle on a fence line or under hardwoods typically costs $1,500 to $2,500 an acre to clear, and a small job starts at a minimum charge of about $1,500.

Which Honeysuckle Is It?

Tennessee has more than one invasive honeysuckle, and they are not the same job. Bush honeysuckle and Japanese honeysuckle are both Asian plants that spread when birds eat the berries; one forms a tall shrub and the other a twining vine. A woodlot can hold either, or both.

Japanese honeysuckle is the vine. Its leaves are simple, oval and opposite, about 1.5 to 3 inches long, and it winds around whatever stands nearby. It can climb more than 30 feet and spread across a tree’s crown until the tree is shaded out.

Bush honeysuckle is the shrub. The state’s pest plant rule lists Amur, Morrow’s and Bell’s honeysuckle, which means they cannot be propagated, sold, offered for sale or released in Tennessee. Japanese honeysuckle is not on that list, so the rule does not cover it, and a stand of it on your land is yours to deal with either way.

Not every honeysuckle should come out. Some honeysuckle vines are native, and one test separates them from the invader: on the native vines the upper pairs of leaves are fused together around the stem rather than separate. Check before cutting anything that blooms in a pasture hedge.

How It Spreads and What It Does to a Woodlot

Birds do the planting. They eat the dark berries and drop the seeds along fence lines, tree rows and woodlot edges, which is why honeysuckle shows up where birds perch. From there it spreads by runners as well.

Left alone, it does damage in four ways:

  • Smothered saplings. Runners wind tightly around small stems and strangle them, so a woodlot stops replacing its own trees.
  • Shaded canopy. A vine that climbs into a crown can shade the tree out, and dense growth on the ground blocks the light that native plants need.
  • Bare winters. Honeysuckle stays green long after the hardwoods drop their leaves, so it keeps its advantage through the months when everything else is dormant.
  • Wrecked fences. The mat adds weight and tangles the wire, and pulling a wired fence out of it takes longer than cutting the vine.

Why One Cutting Does Not Finish It

A fence line stripped of vines on Saturday can look green again by the next summer. Cutting or grinding removes the top of the plant; the root system stays alive and sends up new runners. Pulling by hand works only when the whole stem and root system comes out, because anything left behind resprouts.

Mowing or cutting alone is not the whole answer either. Control works best when it starts early, with repeated pulling, cutting or mowing followed by herbicide. The first pass is the fast part and opens the ground. The follow-up is what turns a cleared fence line into a lasting result.

A Honeysuckle Plan, Visit by Visit

  1. Map it in winter. Walk the property after the hardwoods have dropped their leaves. Honeysuckle stays green and is easy to trace along fences and through the trees. Flag the trees, posts and native vines you want kept.
  2. Choose the method for each stand. A single fence line suits careful cutting along one side. A woodlot floor carpeted in vines and privet suits forestry mulching. Most properties have both.
  3. Cut and grind the growth. Our crew mulches the stand on site, steers around every flagged tree and leaves stumps flush with the ground. Nothing is piled, so nothing needs a burn permit or a truck.
  4. Cut the regrowth while it is soft. New runners come from the roots. A return visit that cuts them while they are short keeps the roots spending their stored energy. It is priced as its own line, so you decide on it.
  5. Bring in a licensed applicator. Herbicide is a licensed applicator’s work, arranged by you and applied to the label. Foliar sprays go on in early spring or late fall, with cut stump and basal bark treatments for stems that resprout. Our crew does not apply it.
  6. Keep watching the edge. Seeds arrive from birds every year, so a new runner on the fence in spring is easy to cut when you catch it early.

Pro tip: Before any machine works a fence line, walk it and flag every post you can find. Vines hide old wire for years, and wire found with flagging tape costs nothing, while wire found with a cutting head costs repair time.

What Honeysuckle Removal Costs

A honeysuckle fence line or a woodlot floor worked around the trees you keep typically costs $1,500 to $2,500 an acre, the vine and privet band on the Hohenwald pricing page. A narrow strip is priced by the share of an acre it covers. A stand so thick it counts as a block of ground falls in the $1,500 to $4,000 forestry mulching band, and clearing a whole tract to an agreed finish can run to $4,500.

Honeysuckle workCostNotes
Vines along a fence line or woodlot edge$1,500 – $2,500 per acreA strip priced by the area it covers
Dense stand filling an old field corner$1,500 – $4,000 per acreThe forestry mulching band
One short fence line or a single cornerMinimum charge of about $1,500Where small jobs start; charged in place of an acre rate, never added to one
A return visit to cut regrowthListed on a separate line in the quoteA separate line; you decide whether to book it
Spraying the regrowthPriced by the applicatorHerbicide is the applicator’s work, not ours

On every visit, brush, small trees and stumps become mulch on site, stumps finish flush with the ground and nothing is hauled away. Full stump removal below grade, and cutting and hauling very large trees, are discussed and priced in the quote. Grading and build pads are not part of our price: we clear to the ground so a builder can grade.

Density, slope, the trees you keep and the way in decide where a job falls in its band. Our Hohenwald forestry mulching cost guide compares day rates and hourly bids with an acre price, and the Tennessee land clearing cost guide covers prices across the state.

Honeysuckle Around Hohenwald and Across Tennessee

The method is the same anywhere in the state: cut, return for the regrowth, treat what comes back and keep the ground open. What changes from place to place is the ground the machine works on.

Hohenwald, Lewis County and the Natchez Trace

Japanese honeysuckle is one of the invasive plants of greatest concern along the Natchez Trace Parkway, which passes near Hohenwald at the Meriwether Lewis site. Around Hohenwald the land is mostly hardwood woodlot with pasture and fence lines between the trees, and a vine like this climbs the saplings and runs the wire. A woodlot with honeysuckle often has Chinese privet beside it, and one visit can take both. A winter walk shows whether a woodlot has it. Our Hohenwald land clearing page covers the towns from Linden to Lawrenceburg and the permits that apply.

Elsewhere in Tennessee

Honeysuckle shares fence lines and woodland edges with other invaders across the state. Our guides to Chinese privet, multiflora rose and autumn olive cover those plants, and a single visit can clear several. South of the line in Alabama, the Huntsville honeysuckle guide covers that side of the Tennessee Valley.

Frequently Asked Questions

Is Japanese honeysuckle illegal in Tennessee?

Not on the state’s pest plant list. Amur, Morrow’s and Bell’s honeysuckle are on it, and those cannot be propagated, sold, offered for sale or released. The rule stops new plantings and sales; it does not clear plants already growing on your land.

Does a forestry mulcher kill honeysuckle?

It brings down the vines and the brush they climb, but the roots survive. Runners come up from them, so a return visit to cut the regrowth and a licensed applicator’s treatment are part of the plan.

When is the best time to clear honeysuckle in Tennessee?

Map it in winter, when it is the only green on the fence line, and clear it when the ground is firm. Regrowth is cut in the growing season while it is soft, and sprays go on in early spring or late fall.

How much does honeysuckle removal cost in Tennessee?

A fence line or woodlot floor runs $1,500 to $2,500 an acre, and a dense stand $1,500 to $4,000. Small jobs begin at the minimum charge of about $1,500, and spraying is priced by the applicator.

Get Honeysuckle Off Your Fence Lines

Request a free quote and we’ll contact you to discuss your property, access and the clearing you need. The quote treats honeysuckle as work over a season or more: the cutting and any return visit are priced as separate lines.

Let's Get Started on Your Land

Request a free quote. We'll contact you to discuss your property, access, and the clearing you need.

Get a Free Quote

Or call us directly: (901) 617-4428

Call Free Quote