Land Clearing Cost in Duncan, OK

Every job around Duncan prices from one of four per-acre bands, whether it is a half acre of cedar behind a house in town or eighty acres of pasture between Marlow and Velma. Within each band, three things set the figure: how tall and thick the cedar has grown, what you want left standing, and how the machine reaches the work. Use the ranges below for a budget; a written number follows once we confirm we can schedule work in your county.

When we can take the job, the written quote names the method, the agreed finish and one price. It also lists what is left out, such as a later pass for cedar seedlings, so two bids for the same pasture can be compared line by line. Stump removal and grading are never part of it: if your ground needs them, your dirt or excavation contractor does that work, not Cut Brush. Nothing is added once work starts unless you ask for it.

If permits come first for you, start with the Duncan and Stephens County permit guide. The methods are explained on the Duncan services page, the statewide view is in our Oklahoma land clearing cost guide, and the cedar, cost-share and permit background is on the Duncan land clearing page.

Duncan Rates by Type of Work

Forestry Mulching

$1,500 – $4,000 / acre

Cedar and brush ground to chips where they stand. Knee-high cedar scattered across open grass prices low; a closed stand of tall cedar along a creek or draw prices high.

Cedar & Pasture Clearing

$1,500 – $2,500 / acre

Cedar and brush taken out of grazing ground and fence rows while shade trees and windbreaks you want are kept. Most pasture recovery work around Duncan fits this row.

Land Clearing

$1,500 – $4,500 / acre

A whole tract taken to the finish written in the quote. Open ground with light growth sits near the bottom; creek timber felled and mulched down to ground level sits near the top. Stump removal and grading are done by your dirt or excavation contractor, not by Cut Brush.

Lot & Homesite Prep

$1,500 – $4,500 / acre equivalent

House site, drive and utility path opened on an acreage or a town lot. A floodplain lot inside Duncan has its city permit question settled first, and any grading or pad work is done by your dirt or excavation contractor, not by Cut Brush.

Small jobs price by the trip more than by the acre. Hauling the mulcher to a lot in Comanche or a fence row near Ringling costs the same whether it runs two hours or a full day, so the working floor for a project is close to $1,500. Putting several small areas into one visit is the easiest way to get more from that minimum.

Five Factors Behind a Duncan Price

How tall the cedar has grown

OSU Extension sorts redcedar work by height: under six feet, six to twenty, and over twenty. Each step up means bigger stems, slower passes and more hours per acre. A pasture priced today and again in five years is a different job, because the trees do not wait.

How many trees per acre

Scattered cedar across open grass goes quickly, with the machine moving tree to tree. Once a stand closes in, the head grinds nearly every foot of ground. OSU uses 250 trees an acre as one of its dividing lines, and density usually moves a Duncan figure as much as acreage does.

What stays standing

Big shade trees, a windbreak on the north side, trees around a pond or the house: every keeper means careful work around it. Flag what stays before the visit so the quote reflects it. A pasture taken down to grass with nothing kept runs faster than one with dozens of keeper trees.

Getting the machine in

Mobilization depends on where the assigned equipment is coming from, since this area is served from outside it. After that, a gate wide enough for a trailer, a solid lane and a work area near the road keep hours on cutting. Mention cattle guards, locked gates and wet crossings when you ask for a figure.

Cost-share and permits

Neither changes our per-acre rate, but both change your net cost and the start date. The state cedar cost-share skips Stephens, Comanche, Cotton and Jefferson this fiscal year, and an acre or more of disturbance needs ODEQ stormwater coverage before work starts. Inside Duncan, a floodplain lot has its own city permit.

Duncan Pricing Questions

Budget $1,500 to $4,500 an acre for most work. Pulling young cedar out of open pasture is the lower part of that range; a tract of tall cedar and creek timber mulched down to ground level is the upper part. Tell us where the land is; if we can schedule work there, a look at it turns the range into one written figure.
Pasture work grinds the cedar and brush and leaves the grass, the roots and the surface in place. Full clearing takes down bigger timber and denser stands, and the extra machine hours are why it runs to $4,500 an acre while pasture work stops at $2,500. Stump removal and grading are not part of either; if the ground needs them, your dirt or excavation contractor does that work, not Cut Brush. The Duncan forestry mulching cost guide compares mulching with dozing and piling.
Not through the state's FY27 cedar program, whose district list does not include Stephens, Comanche, Cotton or Jefferson (as read October 2026). Where that program does apply, its rate sheet pays a set amount per acre, such as $419.11 for mechanical control above 50 percent canopy, not a share of the invoice. Ask your county conservation district and NRCS office about other help.
Permits add steps and sometimes weeks rather than rate. ODEQ construction stormwater coverage applies from one acre of disturbance, and Duncan wants a Floodplain Development Permit for building in the city floodplain. Requirements vary by parcel, scope and jurisdiction, and the governing authority makes the determination. The Duncan and Stephens County permit guide cites each rule.

See What Your Ground Will Cost

A quote request costs nothing. Tell us where the land is in Stephens, Comanche, Cotton or Jefferson County and we will confirm availability.

Request a Free Quote

Or call us directly: (919) 525-3950

Call Free Quote