Forestry Mulching Cost in Gypsum, CO (2026)
Cut Brush Team · October 31, 2026 · 5 min read
Forestry mulching around Gypsum, Colorado costs $1,500 to $4,000 an acre, and cutting Russian olive and brush off a ditch bank or river bottom costs $1,500 to $2,500 an acre. A day rate, an hourly rate and a per-acre price each answer a different question, and setting one beside another without a little arithmetic is how quotes get misread.
Every band buys the same finish: brush, small trees and stumps mulched on site, stumps cut flush, nothing hauled off. Removing stumps below grade, or cutting and hauling very large trees, is discussed and priced in the quote, and grading sits outside our price because we clear to the ground for your builder. A small job starts at a minimum charge of about $1,500, billed in place of an acre rate and never on top of one.
Day Rate, Hourly Rate or Per Acre
A day rate rents the machine and its operator for the day. You receive whatever the mulcher gets through, and a stand thicker than it looked means the slow hours land on your bill. An hourly rate does the same in smaller pieces. A per-acre price buys the finished ground instead, so the risk of a slow day sits with the crew that quoted it.
Turning an Hourly Quote Into Acres
If your quote is by the hour, build the job total first. Multiply the rate by the hours, add the trailer or mobilization charge, and divide by the acres the hours will actually clear.
| Example quote (not a price list) | Job total | Acres cleared | Per acre |
|---|---|---|---|
| 12 hours at $200, plus a $400 trailer charge | $2,800 | 2 | $1,400 |
| The same hours on a thicker stand that ends at 1 acre | $2,800 | 1 | $2,800 |
The rate did not change between the rows; the ground did.
How Long an Acre Takes
A tracked mulcher typically clears 1 to 2 acres a day in light brush, and closer to half an acre a day in dense growth with thick stems. So “how long does one acre take” has two answers around Gypsum, and four things set the pace.
- Density. Thin brush on firm ground lets the head keep moving. A closed stand makes the machine back up and take it in bites.
- Stem size. Small stems turn to chips quickly; bigger trunks take longer.
- Slope. On a side hill the operator works slower and in tighter passes.
- Access. A long or narrow approach, or a gate too tight for the trailer, uses hours before the first cut.
A bottom full of Russian olive sits at the slow end of all four.
The Cheapest Way to Clear Wooded Land
The cheapest method depends on what is growing. Grass and soft weeds on an idle field are a mowing job, and our Colorado brush hogging cost guide covers that work. Once saplings pass 2 to 3 inches thick, the work moves to the mulcher. Clearing with a loader and hauling the debris away adds trucking and disposal to the bill, and piles that stay on the ground have to be burned, which takes a permit: Eagle County issues open burning permits, and the county can restrict burning when conditions turn dry. Mulching grinds the material where it grew, so the second job of disposal drops out. For woody growth, that usually makes it the lowest total.
What Moves a Russian Olive Quote
Three things set where Russian olive ground lands in its band, and none of them shows on a map.
- Water-edge access. The machine goes onto soft ground beside a river or ditch only when it will hold. A wait for firmer ground changes the start date and leaves the rate alone.
- Thorns and stem count. Young trees in a strip go quickly. An old, closed stand does not, and thorns slow any hand cleanup.
- The sprout visit. Russian olive grows back from stumps and root fragments, so one cut never settles it. A return visit by our crew appears on a separate line of the quote, while stump treatment belongs to a licensed applicator and carries that applicator’s price. The Colorado Russian olive removal guide sets out the visits.
A ditch or bank is measured by the ground it takes up. A strip 20 feet wide and 2,178 feet long makes one acre, so a few hundred feet of bank bills at the minimum charge.
Permits That Move the Schedule, Not the Rate
A permit can shift the start date or where the work stops; it rarely touches the per-acre figure. On unincorporated land, Eagle County Engineering issues grading permits for soil disturbance, grading, excavation and earthwork, and a floodplain development permit for development in a designated floodplain, which can touch river-bottom ground. Inside the Town of Gypsum, Community Development is the office to ask. Requirements vary by parcel, scope and jurisdiction, and the governing authority makes the determination.
Frequently Asked Questions
How many acres can a forestry mulcher clear in a day?
About 1 to 2 acres in light brush and closer to half an acre in dense stands. We quote by the acre instead of by the day, because a day covers very different ground depending on the growth.
How much does it cost to mulch one acre?
One acre of mulching runs $1,500 to $4,000, depending on density, slope and access. Russian olive and brush along a bank or bottom edge sits in the $1,500 to $2,500 row. The full list is on the Gypsum pricing page.
Does a small job still cost $1,500?
Yes, for a very small project. A corner lot or a short ditch run is billed at the minimum charge of about $1,500 as a floor, not as an add-on. Past that, the acre bands take over.
Get a Price for Your Gypsum Ground
Request a free quote and we’ll contact you to discuss your property, access and the clearing you need. The quote lists the first pass and any return visit as separate lines.
Read more: the bands on our Gypsum pricing page, the towns we cover on the Gypsum land clearing page, and statewide figures in the Colorado land clearing cost guide.
More from the Cut Brush Blog
Keep reading for more tips and guides on land clearing.
Guide Russian Olive Removal in Colorado: Clear, Treat, Then Watch the Sprouts
How to remove Russian olive in Colorado: why one cutting fails, the clear, treat and watch plan, Eagle, Garfield and Larimer notes, and cost per acre.
Cost Guide Forestry Mulching Cost in Colorado (2026 Guide)
Forestry mulching runs $1,500 to $4,000 an acre with Cut Brush around Denver. See what Gambel oak, foothills granite and beetle pine do to a Colorado job.
Let's Get Started on Your Land
Request a free quote. We'll contact you to discuss your property, access, and the clearing you need.
Get a Free QuoteOr call us directly: (919) 525-3950