Land Clearing Cost in Maryville, TN

These are the ranges Cut Brush works from in Maryville, Alcoa, Townsend, Walland, and the rest of Blount County. Two local factors shape pricing here more than anything else: terrain that runs from flat limestone valley to mountain foothill, sometimes on a single parcel, and karst geology that calls for careful equipment routing. Use the ranges below to plan, then schedule a free on-site walk-through for an exact written quote.

Review the site-planning questions in our Maryville slope, sinkhole, and permit guide.

Cut Brush Price Ranges for Blount County

Forestry Mulching

$1,500 – $4,000 / acre

Sapling and brush ground at the low end; heavier mixed stands and slope work toward the top.

Brush Clearing

$1,500 – $2,500 / acre

Privet, multiflora rose, autumn olive, and woody fencerow growth beyond mower territory.

Land Clearing

$1,500 – $4,500 / acre

Valley acreage and foothill tracts; selective work quotes lower, dense timber higher.

Lot Clearing

$1,500 – $4,500 / acre equivalent

Footprint, drive, and utility corridors; most finished lots total between $2,000 and $6,000.

Equipment transport sets a practical minimum near $1,500 per project, including parcels under an acre.

What Moves a Clearing Quote in Blount County

Slope

Grade separates Blount County quotes more than anything else. A flat valley parcel and a steep foothill face are different jobs with different machine hours, and slopes past safe operation are removed from the scope rather than priced in.

Vegetation size

An acre of multiflora rose and privet clears quickly. An acre with 8-to-12-inch stems takes several times longer. Vegetation size drives more of the final price than acreage does.

Karst features on the parcel

Documented depressions or suspect low spots mean routing equipment around them, not across, and planning where water goes after clearing. That planning is built into how we quote sinkhole-prone ground.

Equipment access

A narrow, steep, or soft approach slows every machine movement. Easy access keeps the quote low; a difficult entrance shows up in the price.

Which office governs the parcel

Maryville, Alcoa, and unincorporated Blount County administer separate grading or stormwater requirements. Jurisdiction and scope can affect the review sequence and project calendar, so the governing office should confirm what is required.

Maryville Clearing Cost FAQ

Budget between $1,500 and $4,500 for a typical acre, with most mulching-based projects in the $1,500 to $4,000 range. Grade, stem size, access, and the finish you want decide where in the range your parcel sits. A free walk-through gets you a firm written quote.
Yes, when it can be cleared at all, because slope converts directly into slower, more careful machine hours. And there is a ceiling: pitches beyond safe operation get declined at the walk-through rather than priced. A quote from us for slope work means we have stood on that slope and judged it workable.
The bigger effect is usually on the calendar. Maryville, Alcoa, and Blount County use different local review processes, and larger disturbed areas may also require state stormwater coverage. We help identify the likely sequence at quote time, while the governing office confirms the permits for the final scope.
Yes: getting equipment trailered out sets a practical project floor around $1,500 regardless of parcel size. Small cabin lots and partial clears fit fine above that line, and where a job genuinely sits below it, we say so and help you decide whether bundling additional work makes the visit worthwhile.
Modestly, and mostly through routing. Blount County has hundreds of documented structural sinkholes, so we plan machine paths around suspect depressions and think about post-clearing drainage in line with state karst guidance. That planning is built into how we quote here rather than billed as a surprise extra.

Get an Exact Number for Your Land

Free walk-through and written quote anywhere in Maryville, Alcoa, Townsend, or greater Blount County – no obligation.

Request a Free Quote

Or call us directly: (919) 219-2946

Call Free Quote